Default operation¶
The following table details the default configuration for the XVF3610-UA and XVF3610-INT firmware version 5.6 after firmware update to the default configuration.
Parameter |
Default -UA |
Default -INT |
Can Configure? |
|---|---|---|---|
Version (x=patch version) |
5.6.x |
5.6.x |
N |
Reference input FROM host |
USB UAC 1.0 48k samples/s PCM 16-bit resolution |
I2S slave 48k samples/s PCM 32-bit resolution |
Y (prior to microphone and I2S start up |
Reference format |
1 or 2 channel (Mono / Stereo) |
1 or 2 channel (Mono / Stereo) |
N |
Processed audio output TO host |
USB UAC 1.0 48k samples/s PCM 16-bit resolution |
I2S bus 48k samples/s PCM 32-bit resolution |
Y (prior to microphone and I2S start up |
Audio format to host |
2 channel - two different streams CH[0] - ASR CH[1] - Comms |
2 channel - two different streams CH[0] - ASR CH[1] - Comms |
Y |
USB Product String |
XVF3610 (UAC1.0) Adaptive |
-n/a- |
Y |
USB Vendor ID |
0x20B1 (8369) |
-n/a- |
Y |
USB Product ID |
0x0016 (22) |
-n/a- |
Y |
USB Vendor String |
XMOS |
-n/a- |
Y |
USB Serial Number |
null |
-n/a- |
Y |
I2C address |
N/A |
0X2C |
N |
MCLK |
24.576MHz OUTPUT |
24.576MHz INPUT |
Y |
Acoustic Echo Canceller |
Enabled |
Enabled |
Y |
Automatic Delay Estimator |
Activated once on startup |
Activated once on startup |
Y |
Interference Canceller |
Enabled |
Enabled |
Y |
Noise suppressor |
Enabled |
Enabled |
Y |