Noise Suppressor (NS)

The Noise Suppressor (NS) suppresses noise from sources whose frequency characteristics do not change rapidly over time. This includes diffuse background noise and stationary noise sources.

The following table describes the settings for the Noise Suppressor.

Table 35 Noise Suppressor (NS) commands

Command	Type	Value	Description
SET_BYPASS_SUP GET_BYPASS_SUP	uint32	[0,1]	Set suppressor bypass parameter. If set to one, the suppressor, which contains the noise suppression stages is bypassed. 0 - suppressor bypass disabled (default) 1  - suppressor bypass enabled
SET_ENABLED_NS GET_ENABLED_NS	uint32	[0,1]	Set noise suppression enabled parameter within the suppressor. If set to one, the noise suppression stage within suppressor is enabled. Changing this parameter only takes effect if the suppressor is not bypassed. 0 - noise suppression disabled 1 - noise suppression enabled (default)