Quick start
===========

This introduction to the tools aims to provide a quick tour of the available
tools and how to use them to create, debug and deploy collaborative applications
on an XCore platform.

.. note::
  The reader is expected to already be familiar with:

  * :doc:`XCore architecture fundamentals </arch-hw-guide/index>`
  * :doc:`XCore programming fundamentals </prog-guide/quick-start/index>`

  To try the examples described within this introduction, the reader will also
  need the following pre-requisites:

  * :doc:`Installed and configured tools </tools-guide/install-configure/index>`
  * An XTAG and XCORE-200-EXPLORER hardware

.. toctree::
   :maxdepth: 2

   single-tile
   multi-tile
   switch-setup
   fast-printf
   debug